ASME B73.2-2016 pdf download
ASME B73.2-2016 pdf download.Specification for Vertical In-Line Centrifugal Pumps for Chemical Process. 5.5.7 Fillets and Radii. All shaft shoulder fillets and radii shall be made as large as practical and finished to minimize stress risers. 5.6 Shaft Sealing 5.6.1 Design. The following are the three basic types of sealing covers: (a) seal chamber (b) universal cover (c) packing box The...
ASME B89.1.10M-2001 pdf download
ASME B89.1.10M-2001 pdf download.DIAL INDICATORS (FOR LINEAR MEASUREMENTS). Bi DEFINITION An cicetronic indicator is a self-contained measuring instrunwnt intended to perform the same function as a mechanical dial indicator. Displacements of a spindle or lever are detected by suitable electronic means and are displayed on a digital display, which is an integral part of the instrument. 82 GENERAL The use...
ASME TDP-1-2006 pdf download
ASME TDP-1-2006 pdf download.Recommended Practices for the Prevention of Water Damage to Steam Turbines Used for Electric Power Generation. 3.1.3 It is recommended that start-up systems on other than once-through units (such as drum type) be designed so that no single failure of equipment can result in water entering the motive steam line. The design method to best accomplish this...
ASME B30.13-2003 pdf download
ASME B30.13-2003 pdf download.STORAGE/RETRIEVAL (S/R) MACHINES AND ASSOCIATED EQUIPMENT. (b) The cab shall be clear of all fixed structures within its area of possible movement. 13-1.4.2 Cab Construction (a) The cab interior construction should protect the operator from knobs, edges, or corners in the event of sudden crane accelerations or decelerations. (b) The cab should be constructed and installed to...
ASME B30.25-2003 pdf download
ASME B30.25-2003 pdf download.SCRAP AND MATERIAL HANDLERS. Where backward stabilities exceed the minimum criteria, the manufachirer or assembler/modifier shall install safety signs in the operator’s cab warning of the hazards Involved in removing the front or placing it in an unstable position. The signs shall include the appropriate signal word according to ANSI Z535.4, and shall also be included in...
ASME B31.5-2016 pdf download
ASME B31.5-2016 pdf download.Refrigeration Piping and Heat Transfer Components. 501.5.4 Vibration. Piping shall be arranged and supported with consideration to vibration (see para. 521.3.5). 501.5.5 Discharge Reactions. Piping systems shall be designed, arranged, and supported so as to withstand reaction forces due to let down or discharge of fluids. 501.6 Weight Effects The following weight effects combined with loads and...
ASME B31.5-2001 pdf download
ASME B31.5-2001 pdf downlocondenser: that part of a refrigerating system designed to liquify refrigerant vapor by the removal of heat. condenser coil: a condenser constructed of pipe or tube, not enclosed in a pressure vessel. design pressure: see para. 501. engineering design: the detailed design developed from process requirements and conforming to Code requirements. including all necessary drawings and specifications....
ASME B30.20-2006 pdf download
ASME B30.20-2006 pdf download.Below-the-Hook Lifting Devices. ingot turnover grab: a manipulating lifter [Fig. 4, sketch (e)]. latch: a device for holding a lifter in the open or closed position. latch, automatic: a sequencing latch mechanism operated by lifter motion. lifting beam (spreader beam): a load-supporting lifter [see Fig. 5, sketch (a)]. lock bar sheet lifter: a supporting lifter [see Fig....
ASME B30.9-2006 pdf download
ASME B30.9-2006 pdf download.Slings. Chapter 9-1 includes provisions that apply to alloy steel chain slings (see Fig. 1). SECTION 9-1.1: TRAINING Alloy steel chain sling users shall be trained in the selection, inspection, cautions to personnel, effects of environment, and rigging practices as covered by this Chapter. SECTION 9-1.2: MATERIALS AND COMPONENTS 9-1.2.1 AHoy Chain The alloy steel chain shall...
ASME B30.7-2006 pdf download
ASME B30.7-2006 pdf download.Base-Mounted Drum Hoists. (e) Swinger brakes shall have holding power in both directions to prevent movement of the rotating member of the load-handling equipment. The brake shall be capable of being set in the holding position and remaining so without attention on the part of the operator. (f) A power control braking means (such as regenerative, dynamic,...